-
### The problem
On a new flash of ESPHome via serial to the yh002-a Tuya blinds motor, no tuya output is received. Multiple combinations of the expected baud rates and GPIO configurations were attemp…
-
### The problem
Randomly ZHA stops being able to send requests to zigbee devices and reports back EmberStatus.delivery FAILED on for example light.turn on or off service. This can start happening aft…
-
Just started happening to my setup, it removed my access to my devices and wanted me to reconfigure the setup, trying to configure it again or even a full reinstall gives a Appid error for a response.…
-
I would like to control by MQTT two cover switch which are shown on ewelink as king Q4:
[https://es.aliexpress.com/item/EWeLink-App-UE-Reino-Unido-Wifi-Smart-Touch-cortina-interruptor-de-Control-de…
-
Finaly it was working well but after v14438 not.
Had to change again all switches to inverted and then icons are reversed😢
-
**Describe the problem you have/What new integration you would like**
Devices with a serial interface such as UART, RS485 from different manufacturers usually have frame structures defined by s…
-
After upgrade to 14495 (Docker) Blinds are not shown correctly any more.
Blind 'Rechts' is at 20% and blind 'Overloop' is at 30%
Overloop is set to inverted by me to see if it make any difference.
…
-
Please provide your feedback to the Z-Stack_3.x.0 coordinator 20230507 firmware here.
I hope this solves the `NWK_TABLE_FULL` many people were experiencing.
**Changelog**
> # 20230507
> - En…
-
First of all many thanks for this wonderful project :D
I was using RFLink and wanted to switch to something better ^^ and since I had a CC1101 lying around...
I have 4 sun awnings on my windows fr…
-
Would it be possible to get a FW for the bridge to act as a standalone router/repeater?