-
**Is your feature request related to a problem? Please describe.**
I recently buy DIO RF plugs, these are not supported by espruna due to a new RF 433 protocol : KAKU.
**Describe the solution you…
-
The main path of rtl_433 is to have decoders written in C, that have a protocol number inciidentially, recognize packets, and emit data records. There are many of them, and they are enabled by defau…
-
Hi,
I have an 3 elro plugs which can be triggered with the corresponding remote. I'm also running the Arduino software on a D1 with a C1101 connected to it. When I push the button for the first swi…
ituri updated
8 months ago
-
Hey, hope you can support me, slowly I'm going crazy with this.
Some protocols work, some not...
Working:
```
rf.send("elro_800_switch", R"( {"systemcode":5, "unitcode":1, "on":1} )");
…
-
### Latest firmware used?
Keil 8051 V9.53
Tasmota 8.0.1
### Information
Sonoff RF Bridge
### Sniffed data
None......... thats the issue, read on.
### Setup
1 Sonoff Bridge
4 Sonoff DW1 …
-
### Latest firmware used?
Be sure you tried the [latest release](https://github.com/Portisch/RF-Bridge-EFM8BB1/releases) or the [newest binary](https://github.com/Portisch/RF-Bridge-EFM8BB1/blob/mast…
-
I am proposing the following decoding for a swann RF 433 doorbell.
```
decoder {
name = Swann-Doorbell,
modulation = OOK_PWM,
short = 200,
long …
-
https://github.com/gabonator/LA104/pull/116/commits
I saw that someone is creating a new protocol for the application, understood which changes in the files need to be replaced, but I don't know how …
kopRF updated
11 months ago
-
I have a remote control that controls a device.
When I click a button on the remote, the device responds to the command.
I decode the signal with rc-switch (ReceiveDemo_advanced.ino) which is the fo…
-
Hi,
thanks for that nice integration.
First of all, the code is working fine to control 5 different elro sockets from Homebrige UI and Homekit.
But there is an issue when receiving a signal f…