-
**Description:**
when I test the sonic-vxlan.yang,I can not delete the data what I was posted in redis configDB .
deleting VXLAN_TUNNEL failed
error log:Delete will violate the constraint as en…
-
When I configure EVPN Vxlan used source ip of Loopback like 1.1.1.1/32, It would learn vxlan remotevtep by bgp evpn. And then I configure the IP Address of Vxlan Tunnel like 100.1.1.1/24 and another i…
-
When clear the bgp evpn neighbor, then the vxlan evpn type3 routes would be deleted. And vlan member of tunnel bridge port was deleted and lead to flush fdb entries by vlan and tunnel bridgeport. But…
-
#### Description
When configuring a L2 VXLAN-EVPN overlay on Celestica Seastone2 (Trident3-based) switches in a simple test setup, ARP packets don't reach the server on the other switch.
IPv4 unic…
-
**Describe the bug**
When using EVPN with VXLAN, you could specify a custom route target for each vni in the evpn address family.
This works when entering via cli and will also get saved to frr.conf…
-
https://blog.d2okkk.net/202103/vxlan_evpn_with_frr/#more
前言:本文主要介绍了如何使用Openwrt 官方SDK编译最新版FRR,并使用FRRouting建立VXLAN EVPN网络,实现异地组网。 基本拓扑 1234567891011121314 +-+--+-+ +…
-
### Issue Summary
Hi,
**Context :**
- 1x Mcast VRF with 10x SVI/VLANs (210 to 219)
- 1 mcast underlay group for Mcast VRF
- 1x underlay groups for just one vlan (210)
**Issue :**
- The generat…
-
The Linux kernel supports IPv6 underlay for VXLAN tunnels. It would be nice if EVPN also supported using a v6 underlay (v6 next-hops for EVPN prefixes).
-
Configure BGP EVPN VxLAN using two L2VNI
The host routes are advertised and learned properly.
In the configuration, 2 vlans 30 and 40 are added and L2VNI's configured as 3000 and 4000
while verify…
-
Guys, it's clear that the DX010 is a supported platform for SONiC.
Do we have a list of supported features per ASIC?
I'm really interested to know if the Broadcom chip BCM56960 can support EVPN VXLA…