-
### What happened?
After updating zigbee2mqtt to version 1.37.0 in HA I fond repeated frame parsing error in the log:
`[2024-05-04 11:50:24] error: zh:ezsp:ezsp: Frame changeSourceRouteHandler pa…
-
### What happened?
Tried to bind a secondary endpoint. This worked a few months ago, but have stopped with the following error:
```bash
error 2024-06-21 12:30:35Frame remoteSetBindingHandler pars…
-
Feature request and heads-up; Silicon Labs is phasing out EFR32MG1x + older HW not included in newer Simplicity SDK versions:
EZSP protocol version incremented to EZSP v14 in Zigbee EmberZNet v8.0.…
Hedda updated
3 weeks ago
-
### What happened?
Hello,
before the activities of this morning, all the infrastructure were working very fine since many months, Z2M ok, MQTT ok, HA ok, no issue.
This morning I did a Proxmox …
-
### The problem
Upgraded HA Core from 2024.7.1 to 2024.7.4 yesterday. After upgrade I lost all entities - Amps, Volts, etc on my PJ-1203 energy monitor. I though I had a bad piece of hardware, so …
-
Write ieee command fails on sonoff dongle-e. If I change row 320 in flasher.py from "if not await ezsp.can_write_custom_eui64" to "if not await ezsp.can_rewrite_custom_eui64" it works.
-
### What happened?
The Third Reality 3RTHS24BZ Temp and Humidity Sensors show as Mains Powered Instead of Battery Powered. This may be causing the errors upon startup shown below, because zigbee2mq…
-
### What happened?
Having all kinds of errors after moving from ezsp to ember
Received network/route error ROUTE_ERROR_ADDRESS_CONFLICT for "0" and : ~x~> [ZCL BROADCAST] Failed to send with statu…
xhemp updated
2 months ago
-
Pretty sure this is due to https://github.com/Koenkk/zigbee-herdsman-converters/commit/5f511d34cc1f28d3a8690639b87fbaa47bb791f4. I'm still not familiar enough with the codebase (especially that new pa…
-
### What happened?
Everything was fine but then yesterday I decided to update z2m to latest dev image on docker hub and ever since updating I've been getting error like these in my logs:
```
[202…