-
I am running NCP on MGM210PA32 Module from Silabs. I have connected NCP to my PC over UART. Below is the log when I run my .Net application. I got an error "NCP requires unsupported version of EZSP". …
-
```
Scanning on channel 20
NCP entered failed state. Requesting APP controller restart
Traceback (most recent call last):
File "/home/colter/.local/lib/python3.10/site-packages/bellows/ezsp/prot…
-
### Problem description
Hi,
I would like to have support for this PIR motion sensor/ Light sensor.
Added it via ZHA and it does not show up much, as you can see from attached screenshot.
There a…
-
### The problem
I have a setup with a couple dozen Zigbee devices, coordinated by a SONOFF ZigBee 3.0 Dongle E. Every couple days the dongle / ZHA crash in an unrecoverable way, which I can only solv…
-
### Bug description
I bought two temperature sensors on Aliexpress.
Once the zigbee devices are associated with ZHA, they start working correctly for the first 15/20 minutes, then they always report…
-
### Describe the issue you are experiencing
Every few days to a week, the Silicon Labs Multiprotocol addon will stop communicating and indicate 'resource temporarily unavailable'. yet does not make…
-
Just flashed my Sonoff Dongle Plus ZBDongle-E with Zigbee (EZSP) 7.3.1.0 build 176 using https://darkxst.github.io/silabs-firmware-builder/
I added my user to the uucp group:
```
$ ls -l /dev/tty…
-
I have one of those tygwzw1 that arrived kinda broken - WiFi part was working but was unable to communicate with ZigBee module.
Not sure about the reason (RTL side shows constant retry with different…
kitor updated
3 weeks ago
-
Hi,
I just got to this in the logs:
```
2020-09-24 13:35:35.489 TRACE 27528 --- [AshFrameHandler] c.z.z.d.e.internal.ash.AshFrameHandler : ASH RX: 45
2020-09-24 13:35:35.489 TRACE 27528 --- …
-
See https://github.com/gerbaudo/SusyTest0/blob/master/SusyTest0/enumFactory.h