-
Hi, Is there an easy way to use with 5V (Noctua) fans? I know most of the PC fans are 12 V.
I have 3-4 Noctua fans in my rack and I want to control them, independently from my Home Assistant.
-
my server CPU is at 47 degrees or so and the fans are not spinning, also my hard drives are at 52 degrees …
-
# Model: `sudo dmidecode | grep "Product Name" -B 2 -A 4`
System Information
Manufacturer: Acer
Product Name: Predator PHN16-71
Version: V1.18
Serial Number: NHQLTSI00533007F457600
UUID: 2a…
-
#### Bug Description
As in title the fans speed up if I close the GUI and slow down again to the configured setting if I open the GUI again
#### Expected Result
I guess the fans should stay at th…
-
50% of the time, when booting Windows from Clover, it just shows the initial Steam Deck logo with the Windows loader below it then black screen.
Stays like that. I can tell it is still on because t…
-
After installing Klipper v12 everything thats connected to the SB0000 stopped working (Part/Hotend Fan and a Knomi Display).
The Hotend itself is Heating and the Thermistors are working too so i dont…
-
Hi, trying to work out some issues with my current setup. I have an Nvidia RTX 3060 Ti, which for FanControl has two sets of fans - the "Front" fan and the "Middle and Back" fans.
I've set up a cu…
-
A lot of the fans have the capability of stopping completely. Using UNI-SYNC and Fan Control, my fans stop when they hit 0% RPM, but that doesn't happen with this plugin (when UNI-SYNC is stopped)
-
Hi, I installed the tool but it looks like it has no effect on the fan speed. The fan speed is 0 if the CPU is cooler than 70 degrees and I cannot change it with any tool. Secure boot is disabled. Sho…
-
Title says it all. Running the latest version of LibreHardwareMonitor. No fans, other than the CPU fan, are detected.
Motherboard: MSI X870 Tomahawk WiFi
Attached is a screenshot of LHM with Hid…