-
In some cases, such as after a clog or other print pause, the resume puts the toolhead in a position 10cm over the position it should be in. I notice this is almost always before the purge block prin…
-
### Printer model
MK3S/+
### MMU model
MMU2S
### Firmware versions
3.14.0
### Upgrades and modifications
Prusa MMU2S Rear PTFE Holder (https://www.printables.com/model/22339-prusa…
-
### Printer model
MK3
### MMU model
No-MMU
### Firmware versions
3.14.0 for Bondtech Extruder
### Upgrades and modifications
official Bondtech Extruder upgrade, Sunon 4010 fan for…
-
I'm using super slicer.
Start G-code:
MMU_START_SETUP INITIAL_TOOL={initial_tool} REFERENCED_TOOLS=!referenced_tools! TOOL_TEMPS=!temperatures! TOOL_MATERIALS=!materials! PURGE_VOLUMES=!purge_volu…
-
### Bambu Studio Version
1.10.1.50
### Where is the application from?
Bambu Lab Official website
### OS version
windows 10
### Additional system information
_No response_
### P…
-
### What happened
I have hybrid hardware, and it was initially enabled, but due to doing some debugging I set it to CoreXY mode.
Rather than changing my wiring, instead when I changed to corexy, I…
evilC updated
2 weeks ago
-
I've installed 0.2mm nozzle,
switched printer profile in qidi studio to 0.2mm nozzle,
changed nozzle_diameter to 0.2 in printer.cfg
But extruder gears still slips over the filament during nozzle …
-
This is as much a question as a suggestion but I can't add labels:
I might have missed it but does anyone have any dimensions/parameters for using this mod with Happy Hare. I realize that these …
-
### Printer model
MK4S
### Describe the feature
Currently running 6.2.0alpha2
I was surprised after installing 6.2.0a2 that the default parking location during the M600 color change moved from rig…
-
### Bambu Studio Version
1.10.0.89
### Where is the application from?
Bambu Lab Official website
### OS version
Windows 11 Pro 24H2
### Additional system information
CPU: Intel(R) Core(TM) i7-8…