-
```
Hi,
I can't communicate with my Arduino (Duemilanove, ATmega168) with
Firmata under Linux (Arch Linux 64 bit).
I tested both "stock" Firmata that comes with Arduino IDE and
Firmata-2.1beta7.zip d…
-
`Firmata.begin` pushes the protocol and firmware version on the Stream regardless of its connected state. With USB powered devices using a serial host link this is no problem because booting Firmata a…
-
Thanks for your incredible work developing the firmata protocol!
I have forked the C++ firmata client implementation from dimitry-ishenko-cpp to adjust a few things: [https://github.com/NANDLAB/firma…
-
The Arduino Leonardo has 12 Analog pins. But A6 - A11 pins (D24 - D29) are actually other pins that are being re-used (D4, D6, D8, D9, D10, and D12). it means D4 and D24 are the same physical pin.
…
-
How use Firmata in front-end/client instead of server?
I have arduino board for nfc reader/writer purpose. And like to connect the board to any web client who like to use the board to read/write nf…
-
```
1. Uploaded Firmata to my Arduino Mega board
2. Configured serproxy with the serial port and baud rate. Says it's waiting
for clients
3. Loaded the monitor, which connects with Serproxy. Gets stu…
-
```
Hi,
I can't communicate with my Arduino (Duemilanove, ATmega168) with
Firmata under Linux (Arch Linux 64 bit).
I tested both "stock" Firmata that comes with Arduino IDE and
Firmata-2.1beta7.zip d…
-
The error messages in StandardFirmata are all stored in SRAM. I'd like to move them out. There are a couple of options.
1 Move the error strings to program memory. The issue here is the PROGMEM macro…
-
```
Hi,
I can't communicate with my Arduino (Duemilanove, ATmega168) with
Firmata under Linux (Arch Linux 64 bit).
I tested both "stock" Firmata that comes with Arduino IDE and
Firmata-2.1beta7.zip d…
-
```
1. Uploaded Firmata to my Arduino Mega board
2. Configured serproxy with the serial port and baud rate. Says it's waiting
for clients
3. Loaded the monitor, which connects with Serproxy. Gets stu…