-
Need to build switches, numbers, and backlash settings.
-
Occurred on pi11 after a few hours of normal operation while taking observations:
```
E 05-13 11:38:05.136 Unable to apply focus position offset on ZWO Filter Wheel (5) [Camera: 192.168.80.151]: e…
-
Short version: Indigo doesn't detect a Celestron focuser connected to the AUX port on a NexStar mount. Focuser driver expects serial interface.
More details: Using IndigoSky (Indigo 2.0-136) connec…
-
I am having TWO telescopes in operation at the same time. Both telescopes make use of a ZWO EAF focuser. Every time I am using the second EAF focuser it resets, so it seems, to a default 1 value inste…
-
Lipp servers started correctly on last11e and 11w. Logger on 11w periodically succeeds in probing focuser 3 and 4 as well as camera 3 and 4.
However
```
>> Unit.Focuser(3).Pos
17:03:07.880 [INF] […
-
Hello friend, sorry to bother you by opening an issue on your project, but I couldn't find a way to contact you, I would like to know if it would be possible to port the Arduino Nano code to a Seeed S…
-
Camera models are specified by file:
`panoptes.pocs.camera.zwo`
But focuser (and filterwheel) models are specified by class name:
`panoptes.pocs.focuser.birger.Focuser`
Suggest going with one …
-
Using indigo sky on a Raspberry Pi is very nice, but it would be even nicer to use it on an all-in-one device like the [AstroLink 4 Pi](https://shop.astrojolo.com/product/astrolink-4-pi/). This is bas…
-
I, thanks for your job but its possible to add support for servo-motor ?
Today, my focuser is a sg90 servo connected in gpio17 on my rpi. Its possible to use astroberry-diy for control my focuser wit…
-
It would be nice to have it supported, as it looks like natural Astroberry companion :). This board is quite cheap (compared to other hats) and should support big range of motors.
luzik updated
3 years ago