-
I have 2 Symo and 1 ohmpilot but in the setup you can only enter one IP - how can I add more devices
-
Hi, danke fuer den adapter functioniert super !
Frage: waere es moeglich anstaat nur das P-totaal auch die verschieden ringen wieder zu geben ?
Beispiel: bei meiner anlage benuzten wir 2 strings wod…
-
Hello and thank you for this integration !!!
I have 2 Fronius Symo connected in daisy chain and a Fronius smartmeter. I set up this integration 3 times, for slave 1 and 2 as the inverters and 240 …
-
Ich gehe davon aus, dass die Fronius Symo - Serie noch nicht implementiert ist? Ich hätte ggfs. den Bedarf meinen WR entsprechend auszulesen in einem Intervall zwischen 10-30s. Aktuell lese ich ihn mi…
-
Yesterday I finally got my PV system. Are Fronius products.
Now I only have the problem that the inverter provides me with all the data via the Datamanger 2.0, but the SmartMeter does not.
I stu…
-
I have a SolarEdge inverter and also a Fronius Galvo inverter. I've installed this component for both inverters. The sensors of the Solaredge inverter looks very good. Better then other modbus compone…
-
### The problem
The polled data from a Fronius IG inverter with datamanager is only recorded in steps of 1kWh.
Everything produced less than 1kWh is not recorded, everything less than 2kWh is reco…
-
Hi, thank you for your work!
I'm currently working on a local NodeJS API and tried to transfer your python code for the authentication to JS.
So the interesting parts (how I assume) are:
The …
-
### The problem
Since I switched to the refactored fronius integration, quite frequently a lot of the data becomes 'unavailable'. This wasn't happening with the older integration code, I guess it is …
-
### The problem
I'm using a Fronius GEN24 inverter with smart meter and supported battery. The electrician tells me this is a quite new model.
The integration works fine, except for the energy repo…