-
Hi! Im trying to interface a relay board interfaced by a ftdi chip. At this moment i can manage to install everything correctly, read the list of ftdi devices connected, open the device and write to i…
-
This is a pretty cool probe equipped with FTDI FT232H with swd+jtag, and while I have no problems using it with openocd eg.:
`openocd -f $OPENOCD_PATH/share/openocd/scripts/interface/ftdi/jtag-lock-p…
WJKPK updated
4 months ago
-
Hi,
I am one of the early purchasers for your Mercury 1 board and have contacted you a couple of years back regarding Linux support for Mercury board. I am glad that there is Linux support now for yo…
-
I have an Adafruit FT232H board I wish to use for programming SPI flash memory for the iCE40HX4K. This is one example of many generic FTDI boards out there. My intent is to program the flash memory in…
-
If show_devices() is run before a device is plugged in then pyftdi will not detect any newly connected devices even if show_devices() is run again.
If show_devices() is run after a device is plugged …
-
The issue is very straightforward. It is a copy-and-paste mistake in the CMake of `kobuki_ftdi`.
```cmake
catkin_package(
INCLUDE_DIRS include
LIBRARIES kobuki_ros kobuki_nodelet
CATKI…
-
We are using DTBs together with FTDI based USB-RS232 cables. While the cables are attached to the ftdi_sio driver, which provides `/dev/ttyUSB` nodes, the DTBs are excluded in order to be accessible …
-
They are really popular. It would be good to have examples to show how the FX2 can emulate them.
-
I am using pyftdi to communicate with USB device to perform some tests, in which I'm setting pins on the device.
To do this, I communicate with device in following manner:
```
ftdi = Ftdi()
device…
-
Currently RP2040 is set to take 100mA (ref: https://github.com/newaetech/sonata-rp2040/blob/main/usb_msc/usb_descriptors.c#L108)
Investigate if something is more reliable here - suggest maybe ~350m…