-
In subroutine `zolri()` in `phys/module_sf_mynn.F`, the denominator `(fx2-fx1)` is not protected from becoming zero. I have verified it's a divide-by-zero floating point exception in very stable condi…
-
For developing FX2 firmware, you can get most of the way using [the cheap "dev boards"](http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR3.TRC0.A0.H0.Xcypress+fx2.TRS0&_nkw=cypre…
-
_From @mithro on January 10, 2016 6:30_
The FX2 firmware is currently really hard to understand. We should rewrite it to make it easier to understand an extend.
This has been started by @mithro at h…
-
_From @enjoy-digital on January 25, 2016 18:46_
Gateware now supports 1080p30, it would be good to have this resolution available in the FX2 firmware.
_Copied from original issue: timvideos/HDMI2US…
-
### Page URL
https://docs.netapp.com/us-en/ontap-systems-switches/switch-cisco-9336c-fx2/migrate-to-9336-cluster.html
### Page title
Migrate from an older Cisco switch to a Cisco Nexus 9336C-FX2 cl…
-
### Page URL
https://docs.netapp.com/us-en/ontap-systems-switches/switch-cisco-9336c-fx2-storage/install-nxos-rcf-9336c-storage.html
### Page title
Install the Reference Configuration File (RCF)
#…
-
As @mortfell said in #757
baconpaul how doable would it be to allow an option for Surge to send the output of Send FX1 into the input of Send FX2. That would allow us to make some "fx chains" like…
-
Hi,
getting this error when running the script.
Thanks for sharing!
ApplyCypressFX2RegisterEnums.java> Running...
ApplyCypressFX2RegisterEnums.java> FX2_REG_BITS_BREAKPT
ApplyCypressFX2Regi…
-
There is a lot of information about the FX2 in [this Google Doc](https://docs.google.com/document/d/15oMrgGfgziHL9kqiRNEF34UaUKkOw0XkG7-D83iEM1s/edit#heading=h.iu3vz1p0u6k2).
This information shoul…
-
Does your hardware work with the original dvb-usb-dw2104.fw? From what I can see, the original one uses PA6 for h/v control (instead of PD0 in your schematic). But apart from this, it should work?