-
Would it be possible to configure a side as a climate entity? Then it would be possible to define a nice looking thermostat for it in the UI
-
**Describe the bug**
The thermostat is controlling a shelly device. I have enabled the keep_alive to 1 minute and in the shelly I have the timer off set to 10 minutes. Normally the timer should be re…
-
## Verify the following before opening an trouble issue
**Go over all the following points, and put an `x` in all the boxes that apply.
If you're unsure about any of these, don't hesitate to ask. …
-
### Prerequisites
* [ ] Model name of your Devices
BRT-100-TRV
* [ ] Output from Home Assistant Developer Tools state e.g.
```
hvac_modes:
- heat
- "off"
min_temp: 5
max_temp: 35
targe…
-
### Prerequisites
* [X] Model name of your Devices
Sonoff TRVZB
* [x] Output from Home Assistant Developer Tools state e.g.
```
hvac_modes:
- "off"
- auto
- heat
min_temp: 4
ma…
-
Hi!
I have a few Z Wave thermostats (https://heatit.com/produkt/9437/heatit-z-temp2-white) that use a cloud Device Handler when added.
This is their fingerprint: ``zw:Fs2a type:0806 mfr:019B prod:…
-
### Prerequisites
* [ ] Model name of your Devices
Hassio generic thermostat
2x Eurotronic SPZB0001 (with normal working firmware)
### Description
Temperature of BT itself always changi…
-
### Feedback
To reproduce:
1. Define a generic_thermostat entity, and configure at least one preset
2. In the UI, open the thermostat info and choose a preset (let's say "comfort")
3. manually c…
-
Hey!
My ATW ASHP has a minimum set point temp of 20°C (it can't do cooling at all). There doesn't seem to be any way to configure the esphome to use this instead of the default of 5°C. Rather than …
-
edited:შექმენით abstract კლასი smartDevice და საშუალება მიეცით device-ს და მის
subclass-ებს დააიქსთენდონ ის(დაიმემკვიდრონ ის) კონკრეტულად ამ კლასშ შექმენით abstract მეთოდი performAction() და დააიმ…