-
I've finally got around to setting up your v2.0 code - it looks really good! Thanks for your updated documents - I know its not exciting, but they really helped me to get going.
So I'm planni…
-
In the end, it was only inspired by the nanovna V2 project. The dynamic range of the system can be improved by redesigning the directional bridge. The MMIC-based differential amplifier instead of the …
-
Это для ветки dev_clipper_2 недельной давности. Убирал предупреждения при сборке, некоторые предупреждения при работе, доделывал русификацию. Собирал под Qt-6.4.2 под Линукс.
Ещё в принципе есть на…
-
Maybe allow generating G-Code for lasers:
* No Z movements
* Set spindle speed to 0 during rapid moves
-
##### SUMMARY
For automated assembly, we need to know the assembly type of each device on the board, i.e. whether it's a THT or SMT package. In particular, this information might be printed in pi…
-
Firstly, thank you for producing such great open-source software. This is probably the best user interface I have ever used for a program that generates GCode.
I have made some minor changes to the…
-
Originally reported by: **Julian Todd (Bitbucket: [goatchurch](https://bitbucket.org/goatchurch), GitHub: Unknown)**
----------------------------------------
I'd like to cut the pattern (or cut the …
-
File: Gerber.c
Method: calc_cirseg_sq()
This method does not check for invalid arcs.
As stated in the RS274X specification:
Single quadrant circular interpolation plots an arc within one quadrant …
-
Hi,
Have been looking at how to add mightyboard support recently, as have got access to a Replicator clone - however have run into several issues. Main one is, there is no support for MCP4018 I2C dig…
-
Please fill this out:
pcb2gcode version (run pcb2gcode --version to see this):
```
pcb2gcode --version
2.1.0
Git commit: v2.1.0-61-g6738e21-dirty
Boost: 107300
Gerbv: 2.7.0
Geos: Not inst…