-
Hi,
After trying to access the web interface several times I found out that the eWelink app says that my camera is the model GK-200MP2C (the box says GK-200MP2B...) is it possible that this is causi…
-
Many thanks for your work. Two days ago I have an issue with sending MQTT messages for detected motion to my HA installation. I didn't changed anything in, for about a year, working configuration, it …
-
Hi, i've installed one new camera:
```
Firmware Version | 0.1.3
-- | --
Base Version | V5520.2053.0383build20220226
Model | GK-200MP2-B
```
Not sure why... but even I set this timezone in conf …
-
Could you, please, help me solve missing PTZ problem? Other functions are working. I try swapping ptz bin - camera self calibrates, but PTZ controls did not work.
Reported at webpage info:
Firmwa…
-
| | |
|---|---|
|Firmware Version| 0.1.0 |
|Model| GK-200MP2B |
|Base Version|V2524.1.245build20191030|
|Hack Version| 0.1.0 |
The device is connected via ethernet, but I've fully blocked …
ghost updated
4 months ago
-
Using the latest version (0.1.0) with a fresh sonoff
Clicking the arrows does not do anything
-
First of all: Thanks for this amazing work! I've installed version 0.0.7 without any issues, but then realized that the onvif_srvd daemon did not survive after startup. I then used the exact same sett…
-
Hello,
For an unknown reason, since some weeks (i don't know exactly), the firmware available doesn't appears in maintenance page. So, the upgrade firmware is not possible.
The fimware installed …
-
Hi, when trying to set this field to `0` as suggested, its reverted once I save & reboot. Any way to fix it manually via CLi or something? Thanks
![image](https://user-images.githubusercontent.com/…
-
Loaded GK-200MP2-B on SD card (as that is what my camera seems to be), confirmed the sonoff-hack/model file states the same, but on the sonoff hack web portal, once camera is up, it says GK-200MP2C. …
ggggh updated
5 months ago