-
The format of OGN-specific beacons is documented in the [wiki](http://wiki.glidernet.org/wiki:ogn-flavoured-aprs).
Unfortunately the preliminary ogn-client version 0.2.6 sends modified receiver beaco…
-
The problem keeps coming up with registration of second-hand devices when the previous owner has not un-registered. To avoid the need for "staff" intervention, I suggest "expiring" devices after some…
-
-
We have now support for **ADSB** messages in our OGN APRS network
The APRS message looks like:
ICA4BB26A>OGADSB,qAS,ADSB:/191055h4039.46N\00314.71W^076/309/A=011325 id094BB26A +3136fpm THY8CV
I…
-
Just a small feature request for future: APRS support.
https://en.wikipedia.org/wiki/Automatic_Packet_Reporting_System
I think this could be implemented as one "simulator" data source quite eas…
-
XCSoar version
--------------
7.39
What should XCSoar do differently, what functionality should be added?
----------------------------------------------------------------------
Add …
-
Hi,
The binary from glidernet is dynamically linked and requiring libjpeg8, which is not available for debian.
It is possible to compile ogn-rf from this source, which is running successfully with l…
-
Hi Peter,
I installed your image but cannot get my receiver on the air (RPi 3 B+, RTL-SDR.com V3, 915Mhz filter/LNA by Uputronics). I attached a link below showing no RF noise or RF sensitivity. I …
-
Thank you for fixing https://github.com/glidernet/ogn-python/issues/77.
I still have an installation problem.
git clone https://github.com/glidernet/ogn-python.git
cd ogn-python
pip3 install -r …
-
I try to list here hardware which could be used for tests, proof of concept, etc.
DIY-Tracker: http://wiki.glidernet.org/ogn-tracker-diy
- 32-bit CPU: STM32F103
- RFM69 or RFM95 RF chip
- almost…