-
When GrovePi is attached, Pi will hang on boot. When detached it boots.
I assume the power consumption is too high.
see
https://forum.dexterindustries.com/t/raspberry-pi-3-not-booting-after-new…
-
We plan to use BME680 on GrovePi and would like to know if there is any plan to add this sensor support? I see https://github.com/Seeed-Studio/Seeed_BME680_V1/ available, with Arduino IDE
-
I have connected Grove Button (GPIO) and Grove Temp & Humidity Sensor (I2C) on UP2 Grove board. I notice the following error in systemd, when I try to read GPIO.
_*_Sep 05 06:20:49 ubuntu sudo[335…
-
Hi,
I am in the process of using mraa implementation to support GrovePI on Artik board. I have the implementation using mraa that works fine on UP2 board and Raspberry PI. Idea is to use the same imp…
-
I'm using the [Loudness sensor](http://wiki.seeed.cc/Grove-Loudness_Sensor/) to detect environmental volume.
I've started using it with the groovepi, via python from the raspii to monitor the enviro…
-
Hi the community,
I'm trying to use Java language with GrovePI. My development is based on the *Software/Java8* directory.
All sensors from the GrovePi+ Starter kit are working in Java excepted…
-
I have a newly installed pi3 with node.js 9.9.0 and npm 5.6.0. I created a groove directory and installed the node-grovepi package using:
```npm install node-grovepi```
I also ran the quick instal…
-
I have this setup:
- Raspberry PI 2 Model B
- GrovePi+
- Grove Relay from Seeed Studio
```
$ ./firmware_version_test.sh
Checking for firmware version
=============================
GrovePi h…
-
hello team,
i tried to install *GrovePi* with the [*Detailed Directions*](https://www.dexterindustries.com/GrovePi/get-started-with-the-grovepi/setting-software/)
but the script `bash ./update_g…
-
After I used my sensor to probe many times, GrovePi’s RST light up.
Raspberry Pi could not detect GrovePi through i2c.
What’s wrong?
Is Grove Pi itself flawed