-
Today used frequency of 1kHz may be really annoying if heard. - But there were issues with high frequencies.
-
- HOP-E300 80mm
- HOP-E200 58mm
- HOP-E801 80mm
- HOP-H801 80mm
- HOP-E58 58mm
See also [Excelvan in escpos-php issue tracker](https://github.com/mike42/escpos-php/issues?q=Excelvan), [this mar…
-
Having flashed 1.13.3 on an H801 (First flashed a Blank 1MB file, then the Espurna) and setting the Wi-Fi credentials via serial (set wifi.pass0 / set wifi.ssid0 / wifi.reset), I can browse to the H80…
mrwee updated
5 years ago
-
As the previous one was closed o will reopen.
Currently for RGBW there is a white value in HA. This controlls the the white diodes. But it only works together with RGB. So there is no way currently t…
-
Hallo,
Firmware 1.12.5 and 1.12.6 have massive problems with the Wifi connection. A connection is only established if I disconnect the power supply briefly. After a few minutes, the connection is …
-
I've talked to the developer behind the great FW for Arilux to join the ESP Easy community but he has no more time to give. His suggestion (also implied by myself) is that we try to merge his code int…
-
### The problem
So previously, I had 148.64.36.0/255.255.255.0 for the subnet on my router and esphome worked fine with my ESP8266. Now I have changed back to 192.168.0.0/255.255.255.0.
DHCP lease…
-
Hi,
The logic for the SDK_PWM_PERIOD_COMPAT_MODE appears to be incorrect?
#if SDK_PWM_PERIOD_COMPAT_MODE
#define PWM_PERIOD_TO_TICKS(x) (x * 0.2)
#define PWM_DUTY_TO_TICKS(x) (x * 5)
#define …
-
Hi,
I use espurna on H801 dimmers together with a DHT22 on Pin 3 and 2 buttons on GPIO0 and GPIO 2 (exposed as TX/RX/Flash).
It works really nice to turn on/off the dummy relay, but I'd like to …
-
**Is your feature request related to a problem? Please describe.**
No problem. Just an idea for enhancement.
Current situation: I use a total of four H801 LED-Controller. They each have 5 PWM ou…
traeu updated
2 weeks ago