-
Hi Paul,
Maybe this is a very basic question about IMUs... What would be the expected yaw values when using Example6_DMP_Quat9_Orientation each time that _SparkFun 9DoF IMU Breakout - ICM-20948 (Qw…
-
The example code only uses I2C
-
Hi,
I have serveral ICM20948 and i am using them with the DMP interrupt on to get 9-axis quaternions.
I have found that the response time of the IMU are different. i.e. when doing the same movem…
Zzx-J updated
5 months ago
-
### Subject of the issue
Enabling either step counter or step detection features on the DMP appear non funcional
### Your workbench
* What platform are you using?
Custom board w/ nRF52832
* Wha…
-
Branch https://github.com/energia/msp430-lg-core/tree/new_compiler brings support for MSP-GCC 7.3.1.24 with large arrays in FRAM.
I tested successfully building and linking on macOS, with minor ada…
-
I got error i2c/i2c.h missing when I try to build the ICM 20948 ros node package on jetson nano with ros2 foxy .
How to fix it?
Thanks
-
I´m planning to use my [ICM-20948](https://www.mouser.es/ProductDetail/485-4554) to measure Magnetic heading and boat heeling. The sensor is i2c compatible, I use a [cable](https://www.mouser.es/Produ…
-
Hello, When is the I2C version coming out? I have ICM-20948 on a circuit board that has it connected using I2C to ARDUINO.
-
Hi,
first companies seem to stop the production of the gy-86 module, MPU 6050 should also not be used for new projects anymore.
ICM-20948 + baro or the [ICM-20789](https://invensense.tdk.com/produ…
-
There are some parts with QFN package, where the leads at the corner would normally be too close (or even overlap sometimes), due to the small body size. These packages usually define a corner lead-to…