-
Hello nice technique and congratulations on SIGGRAPH publication.
I am trying to run your code with some simple scenes, but I encounter this issue that when the scene only contains a point light, t…
swfly updated
1 month ago
-
-
The `create` page allows for climbs to be illuminated but not saved. After completion of https://github.com/lemeryfertitta/BoardLib/issues/20 they could be uploaded to the Aurora db. There would need …
-
change layer?
-
The blue LEDs in #23 have a forward voltage of 3.9 V, but they are supplied by VBUS which can be as low as 3.6 V when operating on battery power. They fade out as the battery is drained (which might …
-
Usually AC has additional features which doesn't have a state. Ex: Turbo mode, Ionisation, sleep mode.
Also these features can be have state. And good to have toggle mode or select for them
-
This is quite diffcult to phrase, but the Illuminated Keys don't match the Keys that should be illuminated.
**Please describe the bug**
I think this is best done with an example:
This is what h…
-
### Description
Paints are not visible on tiles after pylon teleportation until tiles move out of render distance and back.
Coatings never apply. Thus, objects with echo coating are always visible…
-
Step to reproduce:
1. Check in like EndUser (Test3_end3_123321123@mailinator.com / 123)
2. Click "Systems"
User will see assign to him systems and will illuminated two paragraphs
![2014-09-29_11-57-…
-
# 🐞 feature request
When you use the filament load/unload feature, the position it moves to is at the very front of the printer.
This area is not covered well by the lights in the printer.
…