-
### nodejs-poolController Version/commit
8.0.1
### nodejs-poolController-dashPanel Version/commit
8.0.0
### relayEquipmentManager Version/commit
_No response_
### Node Version
V16.19.1
### Pla…
-
Continuation of closed issue https://github.com/tagyoureit/nodejs-poolController/issues/116
The IntelliCenter is supported but the IntelliValve is not. Or at least not supported via RS485 for incre…
-
I am connecting thru i-link and network socket. The connection is successful. I can see thru debug that the temps for air, pool and spa are being sent (see code below). No other data is displayed. Wi…
-
### nodejs-poolController Version/commit
8.0.1 / master 67b0641
### nodejs-poolController-dashPanel Version/commit
8.0.0 / master cb05840
### relayEquipmentManager Version/commit
_No response_
#…
-
### The problem
The SPA Salt Cel Level only allows values from 0-20. The pool salt cell level allows 0-100. It shoudl also be possible to set the SPA Salt Cell Level 0-100.
### What version of Home…
-
### nodejs-poolController Version/commit
8.0.0/cb05840
### nodejs-poolController-dashPanel Version/commit
8.0.0/cb05840
### relayEquipmentManager Version/commit
Not Applicable
### Node Version
…
-
Hey @parnic! This is long overdue, but I'm finally at a place where I can integrate direct Screenlogic control into [nodejs-poolController](https://github.com/tagyoureit/nodejs-poolController). I've…
-
Please help by doing a [packet capture](https://github.com/tagyoureit/nodejs-poolController/wiki/How-to-capture-all-packets-for-issue-resolution) so this feature can be implemented in IntelliTouch.
…
-
[###] nodejs-poolController Version/commit
7.6.1
### nodejs-poolController-dashPanel Version/commit
7.6.1
### relayEquipmentManager Version/commit
_No response_
### Node Version
v…
-
### The problem
I have switches manually configured through MQTT which work correctly from the entity configuration page.
When I attempt to run an automation which sends switch.turn_off, this tu…