-
Standard pin names as `D10` are unknown for the Nano RP2040.
- Arduino IDE 2.3.2
- Arduino Mbed OS Nano Boards 4.1.5
- FQBN: `FQBN: arduino:mbed_nano:nanorp2040connect`
```
loading library …
-
-
My base board has been completely soldered (minus the screen. I have tried many times to flash the firmware from vscode but it is not working. It says the following: Verbose mode can be enabled via `-…
-
Hi,
I bought two PIC-IoT WA boards and plugged one of them in. After opening up the Curiocity drive and clicking CLICK-ME.HTM
https://pic-iot.com/pic-iot/aws/
I got to this landing page where it …
-
Is the latest generation M5Stack Core2 boards supported? I've tried to flash this board with no success.
https://shop.m5stack.com/products/m5stack-core2-esp32-iot-development-kit-v1-1
-
NFC is a important part of IoT ecosystem and now part of some basic use cases that should be supported by Zephyr.
It is also available on some boards and ICs supported by Zephyr.
A NFC library porte…
-
As was discovered by Paul-HIT in issue https://github.com/named-data-iot/ndn-iot-package-over-nordic-sdk/issues/23, the current ndn-lite library adaptation to the nordic sdk only works on the nRF2840,…
-
**Feature Proposed**
Client library which can be deployed to embedded boards, like Arudino
**Use Case**
IOT Device which is behind NAT and wants to expose some service over internet. Eg a Modbus …
-
The nRF52840 equipped boards ship with the Nordic's SoftDevice v6.1.1. This legacy version of the Soft Device does not provide long range capability. Version 7.0.1 or later of the Soft Device enables …
-
I tried setting up esp32 with espidf framework and there was an error while initializing the project.
PIO Core Call Error: "Resolving esp32doit-devkit-v1 dependencies...\nAlready up-to-date.\nUpdat…