-
**Reported by:** [costake](https://github.com/costake)
**Original Ticket:** [ipmitool/bugs/36](https://sourceforge.net/p/ipmitool/bugs/36)
ipmitool sdr -v
Sensor ID : Temp \(0x1\)
En…
-
**Reported by:** [costake](https://github.com/costake)
**Original Ticket:** [ipmitool/bugs/36](https://sourceforge.net/p/ipmitool/bugs/36)
ipmitool sdr -v
Sensor ID : Temp \(0x1\)
En…
-
**Reported by:** [mareedu srinivasa rao](https://sourceforge.net/u/mareedusf/profile)
**Original Ticket:** [ipmitool/bugs/482](https://sourceforge.net/p/ipmitool/bugs/482)
Hi Zdenek,
Can you pleas…
-
When i create two sensor Fan0&Fan1. Fan0 and Fan1 sensornum is same 0x04. Fan0 sensor lun num is 0. Fan1 sensor lun num is 1.
When Fan1 generate some assertion. I use ipmitool -H Ip -U user -P pass…
-
**Reported by:** [zhangxl](https://github.com/zhangxl)
**Original Ticket:** [ipmitool/bugs/503](https://sourceforge.net/p/ipmitool/bugs/503)
There are 2 BMCs inter-connected with I2C bus on my projec…
-
**Step to reproduce:**
`ipmiutil sensor -N -U -P -F lan2`
**Expected result:**
All sensors will return the same reading value and state with ipmitool result.
**Actual result**
All sensors …
-
SetSensorThresholds function only supports maximum 255 sensors (uchar) --> When system …
-
When I compare the results of `ipmitool sensor list` with the list of sensors in the result from `RetrieveSDRRepository()`, I see many more sensors returned by ipmitool. They are all "discrete" (binar…
-
Hello, I have this board
```
dmidecode -t 2
# dmidecode 3.4
Getting SMBIOS data from sysfs.
SMBIOS 3.1.1 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Su…
-
I used ipmitool -I lanplus -H IP -U USER -P PWD -l 3 sdr get "SDR_LUN3", but it cannot return the correct sdr of LUN3.
I checked ipmi_sdr.c (ipmitool-1.8.18\lib\), ipmi_sdr_find_sdr_bynumtype() did…