-
- Arduino board: Itsybitsy M0
- Arduino IDE version (found in Arduino -> About Arduino menu): PlatformIO in VS Code
- List the steps to reproduce the problem below (if possible attach a sketc…
-
I breadboarded an Adafruit 3677 (ItsyBitsy 32u4 5V) with an Adafruit 4383 (240x135 LCD ST7789).
I'm seeing very slow run-time of the GFX library's drawBitmap().
In the Adafruit forum I asked what's …
-
Hello, my board is not supported by your library, is there any possible solution? Thanks.
Adafruit ItsyBitsy nRF52840 Express, Bluetooth LE
Thanks.
-
My Itsybitsy NRF52840 fails everytime after few seconds to few minutes after CRC check error.
I figured out this is the case with all NRF52840 boards and Circuitpython.
As it is it is impossibl…
-
### CircuitPython version
```python
main branch
```
### Code/REPL
```python
>>> make BOARD=itsybitsy_nrf52840_express USER_C_MODULES=../../examples/usercmodule
Use make V=1, make V=2 …
-
### CircuitPython version
```python
9.0.0 itsybitsy esp32
```
### Code/REPL
```python
# SPDX-FileCopyrightText: 2024 Tyeth Gundry
# SPDX-License-Identifier: MIT
#TODO: Add Adafruit IO feeds fo…
tyeth updated
6 months ago
-
**Describe the bug**
I tried this sample program with the adafruit_itsybitsy_m4_express board. It built successfully, and once flashed, there was a /dev/ttyACM device detected on my laptop. But upo…
joeyh updated
7 months ago
-
Devices like the itsybitsy-m4 are not having the symlink for their MSD mode removed when the device is disconnected. This causes the device to not be able to be flashed until the symlink is manually d…
-
- Arduino board: itsy bitsy m0
- Arduino IDE version (found in Arduino -> About Arduino menu): platformio 6.0.2
- List the steps to reproduce the problem below (if possible attach a sketch or
…
-
Hi,
I've been trying to port tock to the [Adafruit ItsyBitsy nRF52840 Express](https://learn.adafruit.com/adafruit-itsybitsy-nrf52840-express/), mostly copying the already supported Arduino Nano 33…