-
Which would be good USB connected ZigBee controller devices to integrate to zigbee4java?
What are software design options to support multiple devices with completely different serial interfaces or an…
-
Je viens de faire un test rapide dans une VM debian 9 avec deport d'écran X11.
Le port pour moi est /dev/ttyUSB0
le stty ne veut pas un -f mais un -F (corriger la doc pour linux).
Si je me me…
-
Hi, could I just swap the JN5169 chip over TLSR825x that’s usually on tuya switches and flash the firmware?
Is it similar to swapping esp with non esp chip to install tasmota/esphome?
https://yout…
-
Zigbee is becoming the de facto standard in home automation. It would be great if `OpenMQTTGateway` could support this protocol. Below I have a write up about the most promising solution at the moment…
-
Please consider porting ESPurna to the new Sonoff Zigbee Bridge (Sonoff ZBBridge)
- https://www.itead.cc/sonoff-zbbridge.html
Itead has just launched Sonoff ZBBridge as an inexpensive Sonoff Z…
Hedda updated
2 years ago
-
Please consider urgently adding more examples for this project. The examples provided often don't work, have zero documentation / commenting and very limited functionality.
Combine that with the ve…
-
the timer shows overflow even when the value is not actually overflowed.
i am currently using jn5168 and i have view that the value if last_rtimer_ticks is greater than now before the actual over flo…
-
Hi everyone, I bought the NXP® JN516x-EK004 evaluation kit two months ago with two JN5169 devices and after few weeks I decided to flash contiki-ng applications on them.
**First issue**: I cannot u…
-
Any chance would consider making a Texas Instruments CC1352P based gateway/bridge or USB-stick/dongle hardware adapter?
The reason is that CC1352 supports all Zigbee radio frequencies so could be m…
Hedda updated
2 years ago
-
Python 2 is end of life and stopped being officially supported in Jan 2020. pip support for Python 2 will be dropped in Jan 2021. This means we should migrate all Python codebase in Contiki-NG to Pyth…