-
I have an HS110 that intermittently is undiscoverable by the CLI despite being accessible in the Kasa app. I suspect the issue is related to the fact that the plug has a low wifi signal but I'm not su…
-
Would it be possible to add support for disabling Remote Access? The Kasa app once had this feature for each device but was apparently removed at some point. Now all my devices are Remotely accessible…
-
Hello everyone,
I've recently pip installed python-kasa and have tried using the command line to discover my HS105 SmartPlugs but have had no luck. When typing "kasa" or "kasa discover" I am met wi…
-
kasa, version 0.6.2.1
Exception: Communication error on system:set_relay_state
Python 3.9.7
MacOS 12.6.3
Example code:
```
import asyncio
from kasa import SmartPlug
from pprint import pforma…
-
## The problem
I have the tplink integration added and it used to work, albeit flaky. I upgraded from 108 -> 109.6 today and now the tp link integration won't load.
## Environment
- …
-
### The problem
All devices using the TP-Link Kasa integration show "Failed setup, will retry". Hovering over the status shows "Unable to get discovery response for [device's hostname]."
Issue …
-
### The problem
Hi,
I have been using Tp-link Kasa integration for a long time. It has suddenly stopped working.
### What version of Home Assistant Core has the issue?
2023.8.4
### What was th…
-
KP125MP2 is a Kasa/TP-Link mini-smart plug with Energy Monitoring and Matter support.
I would be satisfied if I could just turn it on/off -- though access to the energy consumption part would be cool…
-
Hello, I'm running a Raspberry Pi 3B with Touchscreen & TouchUI. When I turn off the printer with my TP Link Plug the Pi goes down as well. This is causing some major issues for me, since sometimes my…
-
# Please read before posting
If you are seeing the problem, please capture a wire shark or tcpdump and post it in this issue.
If you have a different model than the ones listed below please post the…