-
Not sure if this is a firmware issue but when plugged in the keyboard backlight turns off and back on immediately every 48 seconds (I timed it for 3 off/on instances).
Running on NixOS but I'm pret…
-
I added `AUTO_MOUSE_THRESHOLD` to `qmk_firmware/keyboards/keyball/keyball39/keymaps/{mymap}/config.h` to customize Auto Mouse Layer.
The optional parameters were taken from qmk's site. https://github…
-
### Describe the Bug
https://github.com/qmk/qmk_firmware/blob/master/quantum/rgb_matrix/animations/pixel_fractal_anim.h
This RGB effect does not limit the NO_LED and will cause access to the wil…
-
Hello, @drashna.
I've recreated this keyboard from this [schema](https://github.com/74th/sparrow62-buildguide/blob/master/datasheets/sparrow62-v2.0.5-schematic.pdf) and tried to port the QMK firmware…
-
### Issue Description
Hey! 👋
First of all, thanks for developing open source! I got a Lemokey L3 and was missing the keyboard in the original project. The helpful Lemokey support pointed me to yo…
-
### Issue Description
Hi all, I'm a very happy K2 Pro user. Some time ago, I was searching for the firmware of this keyboard in the [qmk/qmk_firmware](https://github.com/qmk/qmk_firmware) repositor…
-
### Describe the Bug
First of all, thank you for developing the custom firmware.
I changed the keymap through VIA. And when I connect via wired, the same keys as I set in VIA are input as expect…
-
I've just started playing with your firmware and have found a few bugs.
1. The rate parameter does not appear to be doing anything unless the keyboard is enabled, the normal rate is determined by …
-
Heya :wave:
I was wondering: does this firmware support the "matrix-less" inputs on the Adafruit Macropad [1]?
The macropad has 12 keyboard switches, each connected to it's own GPIO pin.
Cheer…
erdii updated
3 weeks ago
-
I've been having a strange issue where my pi 400's keyboard and USB ports will be disabled on a cold boot, I've managed to get them working by doing a firmware update, but the fix will only last a reb…