-
https://github.com/echavet/MitsubishiCN105ESPHome/discussions/64#discussioncomment-8858689
-
-
This information is available over cn104, but I don't know if kumo exposes it.
-
raw data for Thermostat.print_all_thermostat_metadata does not match Zone.get_display_temp() and Zone.get_heat_setpoint_raw(), offset is ~2 for current temp and ~5 for heat setpoint (raw data is h…
-
Application Note 3050 for M- & P- Series Units defines the Function Settings ([see page 10 onwards in the corresponding .pdf file](https://www.mylinkdrive.com/USA/App_Notes)) for the indoor units and …
-
issue observed on Kumo and SHT31, should we do anything about it?
sht31 exception:
======================================================================
ERROR: test_Z_Supervise (test_sht31_integ…
-
@dlarrick I was able to follow some online tutorials to listen to the encrypted traffic to kumo cloud servers.
You can use genymotion emulator (free for personal) to bring up a Nexus 6 device with An…
-
Kumo Cloud is showing the following error:
> Code: 2502
>
> Your unit's drain sensor or float switch has tripped. Let a technician know about this.
>
> Start: Sunday, May 5th 2024, 8:33 pm
I…
-
newly enabled github action pylint is highlighting hundreds of issues not being caught by flake8 or pylint within azure. These should be reviewed. Azure is running python 3.7 and this check is for 3…
-
Hey,
is it possible to have two Home Assisant Instances access the same Kumo Cloud account? I have a guest house in the back where I'm running a Home Assistance instance to connect my two Mitsubish…