-
My brand new s0tool periodically shows very high spike spikes in the measurement graph in Home Assistant, see screenshot below.
I already replaced the power supply and the s0tool is running the most …
-
Hi, thanks for this great card, it really helps me to visualise rates and specified loads via target sensors. Would you be able to add support for the Dispatching sensor in Intelligent Octopus? I trie…
-
The Export Energy Today variable appears to reset on a change to Forced Export, which then means that the load attribute is then set to include the missing export and massively increases the perceived…
-
Here is the current REST output from a dual AIO gateway. I'm using the serial number for the Gateway (GW) in predbat. All the sensors that predbat needs exist, just some of them are not properly popul…
-
**Description:**
Currently, the x-axis time span for the plotted data is based on the available data in the sensor. However, the expected behavior should follow the user’s specified time span. For …
-
The SOH of the Astra L ST Hybrid is shown with only 22 %.
I did not check into the source code, but I assume, the SOH is calculated by dividing through the base capacity of the car.
I assume furth…
-
exported the data in xmlx file format, opened in LibreOffice then saved as CSV results in:
"Name : Fname X Lname",,,,
"Address: number STname type, San Diego, CA, zipcode",,,,
"Account Number: accN…
-
**Describe the bug**
I am running the standalone predbat add on.
I am experiencing continual warnings for their 'historical day' data.
I get warnings every 5 minutes as predbat updates its plan. …
-
It seems that my inverter is sending duplicate data which causes the exporter to crash:
python src/exporter.py --port 8787 --interval 30 --inverter $IP
GOODWE DATA EXPORTER v1.4.4
polling…
-
I installed this integration yesterday but noticed that the `sensor.ecu_today_energy` is quite different from what the EMA site reports. But it's not the double as reported in #245.
I have an ECU-R…