-
ISO 15765-4 and SAE J2284
probably https://github.com/openxc/uds-c
-
I read through the readme and a previous issue regarding the type of cable to be used between the PC running FreeSSM and the vehicle. Will one of the commonly available USB to OBDII type adapters work…
-
Hi,
I'm trying to getting this code working. I started to define Honda. but i get an error that i can't build the solution. You described that Honda is the same as Yamaha. so i tried that.
The bui…
-
Hi,
thanks for the project. I'd like to dump my EPS firmware (Touran 2014).
Can I use some other interface than Panda?
I've been using ESP32 in the past: https://blog.danman.eu/playing-with-can-bu…
-
Hi,
I was trying to communicate with ODB2 with my 206 1.1cc auto peugeot which should have the KWB2000 slow protocol.
I built the optoisolated hardware interface and it works properly with perfect s…
-
HI IWANDERS.
I tried from 2 days to make it works but without succes!
I use esp32 wroomer 32U and a mc33290. Witrh this setup i had other library witch work at the same pinrx 16 and tx 17. For mc332…
-
I'm using the readerKWP example which have initKWP and i'm setting init_success = true; so that in order for a request to be sent but on the logic analyzer nothing happens after the initKWP.
I also t…
-
Hi Ivor
I'm trying to comunicate k-line data sending ECT temperature to a cluster from a honda s2000 who has a k-line communication, maybe your project can help me? I know this can READ a k-line, b…
-
Hi Ivor,
I had a GSX-R 600 2011, which uses the K-line. Almost a year ago i started writing some code to comunicate with the ECU, probably i didn't found your library because you implemented the KW…
-
내용이 방대함, 좀더 세분화가 되면 좋을것 같음.
특히 내용의 절반 이상이 통신 프로토콜에 대한 기본기가 없는 경우 이해하기 힘든 경우가 많음.
1. 노드에 대한 사전 설명이 별도로 있으면 좋을 것 같음.
2. 여러 노드가 동시에 데이터를 전송해서 데이터를 사용하지 못하는 경우(충돌,collision)도 -> 충돌(collision)
3. 차동 신호…
hspy updated
4 months ago