-
Let's start with the fact that I really like our existing settings import and export functionality. It provides the visitors of places with a lasercutter to get going fast, with all the lasercutter se…
-
Hello everyone, just wondering if VisiCut has compatibility with FluidNC firmware?
If not, is this something that can easily be added?
Thanks,
Tim
-
When the lasercutter stage is moving up it skips steps. Moving down works fine.
Not exactly sure what the exact problem is, but my guess is that either the gearing is not stiff enough, and/or stepp…
esden updated
2 years ago
-
The lasercutter electronics are powered through the USB connection and not through the main lasercutter power electronics.
This is confusing to the user. One has to always remember to plug in the U…
esden updated
2 years ago
-
As far as I can tell the lasercutter is missing the air assist nozzle. This results in the air not being forced directly at the cut position. It is better than not having any air assist but it is not …
esden updated
2 years ago
-
* [ ] get it
* [ ] print it
* [ ] laminate it
* [ ] mount it to the printer
(To the tune of Harder, better, faster, stronger)
ri0t updated
6 months ago
-
Es muss ein Wartungsplan ähnlich dem des Lasercutters erstellt werden.
-
The Epilog driver support estimation of the job duration (https://github.com/t-oster/LibLaserCut/blob/develop/src/com/t_oster/liblasercut/drivers/EpilogCutter.java#L886).
I think the idea is the same…
-
The units inside the lasercutter software are 1/2 of what they are in reality.
I guess the step count per 1mm is set wrong somewhere either in the PC software or on the smoothie board.
esden updated
2 years ago
-
This is designed to print out a pattern for a full jigsaw to be cut efficiently on a lasercutter.
As such its actually quite difficult to cutout an individual piece.
I'd like to add an option to c…