-
After going for a few seconds, the leds stop responding, coming on for a few seconds then stopping in a loop. The audio also stops responding.
When I go into the PureData UI, it looks like the inpu…
-
Hi @phiten,
I just tried your config with a brand new Obegränsad display and a Wemos D1 mini (original controller removed from the panel). Unfortunately all I get are just random pixels jumping all…
-
https://github.com/Blueforcer/awtrix-light is a light controller for rgb matrix Leds. The Ulanzi smart clock is very popular and can be flashed with this. A module for this could be nice as a feedback…
-
Hi there,
I am using 64x32 RGB LED Matrices in a project where heat development (even some degrees) is a problem. When the LED matrix is connected to the power supply (no LED are lit), there is a h…
-
Thank you for your work on this, and for making it a component decoupled from kluctl proper, I've found it quite useful on several occasions.
I've also recently been using Kyverno quite a bit. Kyve…
-
-Hi
I am not sure if this would be called a bug report or a feature request. So I am going with feature request.
The more recent releases of WLED (14+) now have a 2D feature, allowing the use of M…
-
**Kind of issue?**
I cant seem to get the RGB matrix pattern to change on the slave side of the board. I also can't seem to get the OLEDs to function at all or get the board to change layers. The boa…
-
Hello Zeller,
I am developing an application where it is required to have a very high refresh rate, the application requires a camera to take a photo at a certain instant of the LED matrix display,…
-
- [ ] 7-Segment-Anzeige (#14)
- [x] DS18B20 Temperatursensor (1-Wire)
- [ ] ESP32 (#13)
- [x] Raspberry Pi
- [ ] RFID-Leser (#12)
- [x] Gertboard
- [x] OLED-Display (SSD1306)
- [x] LCD-Modul
…
-
### Blueprint name
Controller - IKEA E1743 On/Off Switch & Dimmer
### Home Assistant Core Version
2021.10.6
### Home Assistant Installation Type
Home Assistant Container
### Description
When co…