-
I'm using a bk7231n cb2s based device with esphome and had already opened an issue there https://github.com/esphome/issues/issues/5435 but it seems the issue is in libretiny's mDNS
to summarize the…
-
### The problem
I'm using `generic-bk7231n-qfn32-tuya` as board and I have created a template switch to run some code with lambda.
When I'm using millis in lambda and try to compile I get this error…
-
```
libretiny:
board: generic-rtl8710bn-2mb-788k
framework:
version: dev
```
not work
```
libretiny:
board: generic-rtl8710bn-2mb-788k
framework:
version: 1.1.0
```
…
-
How do configure the platformio.ini file to use the OTA upload protocol?
-
Hey there,
thank you very much for your work, I recently flashed a plwf105 with the firmware you provided, and it integrates flawlessly into homeassistant. Now, I contemplate about purchasing a petli…
-
Hi,
I have an issue with the SNMP component:
```
INFO ESPHome 2024.4.0
INFO Reading configuration /config/esphome/rf-smart-switch-1ch-0dd25c.yaml...
INFO Detected timezone 'Asia/Almaty'
INFO…
-
**Describe the bug**
I have a smart plug(not Tuya version) with cb2s module ,but the module is using a BK7231M. When selecting BK7231N, the Module would flash just fine, but when power cycling it, it…
-
I've wired the cam board to a serial-usb cable, put "CEN" to ground for half a second twice then i was able to backup the firmware (with this tool : https://github.com/OpenBekenIOT/hid_download_py).
…
-
Hi.
I'm converting a tuya device to esphome.
I stumbled accross a problem. I think not all bytes are read.
Here is a log output from my serial sniffer (received bytes):
```
55 aa 03 07 00 08 …
f3nix updated
2 weeks ago
-
### The problem
When trying to compile a Generic - RTL8720CF (2M/992k) board with the default yaml from the UI I get the following error when trying to build:
/data/cache/platformio/packages/library…