-
http://digistump.com/products/1
https://learn.adafruit.com/introducing-trinket/pinouts
Just starting to brainstorm here on how we can make this easier for different devices. I have both of the above…
-
So after some research, I found how to set the 328p fuse to use the internal clock in case you want to repurpose an Arduino with a suitable chip like a lilypad, or nano or something similar. You need …
-
Has been working perfectly. But I uploaded a new sketch earlier and now get USB Device unrecognised on my Win10 machine (and several others). The upload has upset something, presumably whatever deals …
-
As stated in https://github.com/arduino/Arduino/issues/6369, this causes much confusion, suffering and generally makes Arduino look bad. Let's use the correct name! That extra "P" is really not so sca…
-
The page: https://store.arduino.cc/arduino-nano
The problem is In the Technical specs table, row 11:
"Digital I/O Pins: 22"
that's an error, the number of digital pins in arduino Nano is 12.
My g…
-
I've checked, hardware folder exists and board selections functions fine in the Arduino 1.5.8 IDE. Uses standard Arduino IDE folder locations.
this is the output:
MacBook-van-Remco:tools remcokortek…
-
It seems that the number of sockets is determined in ethernet.h based on RAMSTART and RAMEND. But these facts are both defined for the mega chip instead of the W5100.
They are both defined in arduino…
-
Add new board definitions based on [this gist](https://gist.github.com/ah01/762576)
```c++
#if defined(__AVR_ATmega168__)
// Arduino Diecimila and older
LINE("__AVR_ATmega168__", __AVR…
-
~I will not write anything here because that would be a huge spoiler~
Minigame based on those logic games where you change actuators to control a kind of flux
-
When setting up an NRF24 serial gateway it fails on my Arduino pro micro unless the CE and CSN pins are manually specified by adding the lines:
#define MY_RF24_CE_PIN 9
#define MY_RF24_CS_PIN 10
…