-
**IMPORTANT: Before submitting an issue, please check the following:**
1. **Read [CONTRIBUTING.md](https://github.com/jgromes/RadioLib/blob/master/CONTRIBUTING.md)!** Issues that do not follow this d…
-
Hi, I meet a problem that the chip enter `COMMAND_TIMEOUT` state. This happens when I use `llcc68_write_buffer` with data longer than 4 bytes, the datasheet said that `COMMAND_TIMEOUT` is caused by an…
-
There seems to be a problem with RegIrqFlags, which causes problems in **LoRaSimpleGateway** and **LoRaReceiverCallback** example sketches. The following is far beyond my knowledge, so please bear wit…
-
Hello, this is not a bug in library itself, just a warning and maybe suggestion for enhancement (adding the check). The new V2.1 modules (PCB versions 10498-V1.1 and 10497-V1.0) delivered in December …
-
Thanks a lot for your work. It's a great project.
I am reaching out regarding the possibility of integrating support for the LLC68 module within your repository. However, I've encountered challenge…
-
I have a same issue that previous, but in a different module.
I use a Ebyte e22-900m22s module, that have a LoRa chip llcc68, its seems a semtech 126x.
The data from this devices is [here](https://w…
-
[]
![recv](https://github.com/tapparelj/gr-lora_sdr/assets/29034846/1debd4ee-a6fd-45d5-be57-e71234a7fcfb)
I use hackrf and plutosdr make this. Both. Them can't recv LLCC68 mod
-
Hi,
is it possible to add support for an Inkbird ITH-20R for esp32 with cc1101 i am not sure how to add additional decoders. a link for it working with rlt_433 is , https://github.com/ehagan/rtl_4…
-
I am experiencing problems in receiving with the Arduino R4 Minima board, while the same sketch loaded on Arduino Uno R3 works correctly; specifically, the data coming in is not consistent. In transmi…
-
### Sketch that is causing the module fail
```c++
/*
RadioLib SX126x Spectrum Scan Example
This example shows how to perform a spectrum power scan using SX126x.
The output is in the …