-
I'm using a Raspberry Pi 3B+ board with OpenWRT OS (v23.05.2) and trying to use a Semtech SX1302 LoRa Corecell interface board via USB interface to use them as a LoRa Gateway setup (RPi + Semtech SX13…
-
Hello, my question is regarding RadioHead libs.
http://www.airspayce.com/mikem/arduino/RadioHead/index.html
I already saw the similar topic here:
https://github.com/CongducPham/LowCostLoRaGw/issu…
-
in case of missing board selected: Feather M0 as a *sensor* which does not use time
the above mentioned library is only valid for ESP32
why don't you use an universal time library for that functi…
-
Hi all!
Does chirpstack-gateway-bridge support the ability to connect Gateways built on the reference SX1302, SX1303?
The example configuration file itself says that it is intended for the SX130…
-
This feature enables LoRaRAW Unique address transmission. i.e. From the gateway to a specific sensor such as a Droplet/MicroEdge
Requires: https://github.com/NubeIO/driver-lora/issues/8
1. Allow user…
-
Hi
SNR Value is wrong when published for gwmp-mux to gateway-rs or any other semtech packet fwd listner
received packet with snr: 6.8, but after gwmp-mux snr changes to snr: 0.0000002, this wil…
-
There seems to be a problem with RegIrqFlags, which causes problems in **LoRaSimpleGateway** and **LoRaReceiverCallback** example sketches. The following is far beyond my knowledge, so please bear wit…
-
I suggest adding iGate Digipeater symbol to the UI.
It is a green star with letter I.
```
"overlay": "I",
"symbol": "#",
```
This will be a common use-case.
-
`You have a Raspberry 4B
Compiling for Raspberry 4B
g++ -DPABOOST -DMAX_DBM=14 -DGETOPT_ISSUE -DRASPBERRY2 -c lora_gateway.cpp -o lora_gateway_pi2.o
lora_gateway.cpp:351:22: error: ‘loraChannelArra…
ga405 updated
4 years ago
-
I have issue. Cannot to start LoRa gateway work automatically after powering it up. Do you have any recommendations how to do auto start for this code?