-
The example Speak, when compiled and loaded into the M5Tough, plays the "dingdong" sound on setup and does nothing further. There are no buttons displayed on the touch screen, and touching the lower …
-
When I remove the usb power supply, the M5Core is switched off and generates some strange sounds (tik... tik... tik...).
Any option to keep the product running on its own internal (little) battery ?
…
-
進捗管理用のissueです。新しいドキュメントを翻訳する際は **最初にこのissueで宣言をお願いします**。作業に重複が合った場合は、原則としてissueで先に宣言した方を優先します。
翻訳作業の進め方については[README](https://github.com/moddable-OpenSource/moddable-jp/blob/dev/translate-jp/transla…
-
Hi. I had the idea to make an ePaper screen to mount on a bike, that connects to a smartphone over BLE, for navigation. I was wondering if there if is code in Osmand that would be suitable to render t…
-
14.05.2024 Marius
m5core geht nicht an, lädt nicht, kein flashen möglich alles Fehlerquellen wie Treiber Kabel usw. ausgeschlossen.
Fortsetzung des Projektes nicht möglich..
-
Preface: I have no idea if this belongs in this project, or if I should just 'steal' the camera communication parts and make my own
I now have a M5Stack Core2 (ok, two: I like to have a spare to lo…
-
### Describe the bug
When using any example serial does not print any out.
### To reproduce
```
void setup() {
M5.begin();
while (!Serial);
Serial.printf("this will not be printed\n");
}…
-
How can I perform a glitch free initialization?
Example: I have a digital I/O pin that is in input mode, that reads high, and I need to turn it into an output pin that is high without causing any gli…
-
Hi,
I have successfully set up the voice assistant on a CoreS3 using the Yaml below.
https://github.com/m5stack/M5CoreS3-Esphome/blob/main/voice-assistant/m5stack-cores3.yaml
and im very happy to h…
-
Hi,
I got the tally light working on several M5Stack modules (Core, Core2 and StickC Plus, all ESP32). All using WiFi to connect to the Atem.
In some situations however, the Wifi signal is unrel…