-
# About | MB’s Blog
[https://hypernova101.github.io/MihirCSP/about/](https://hypernova101.github.io/MihirCSP/about/)
-
Over the past 3 weeks or so, MB has been crashing randomly on me. Happens on various websites and after various durations, can't isolate a pattern or obvious cause.
This has happened both while wat…
-
Hello!
When I was using MultiMap, I found that running directly with "gamma.L
-
From https://github.com/cms-sw/cmssw/issues/46040#issuecomment-2420368633 the cut/expression parser uses 390 MB (constant cost, i.e. gets amortized across threads). The top 10 modules with the largest…
-
Noticed mb vcore voltage for my 10850k on a z490 taichi (nuvoton) was exactly double my shown vcore in hardware monitor and cpu-z, I understand the cpu section has voltages but they are vid... when ru…
-
Noticed in https://github.com/cms-sw/cmssw/issues/46040#issuecomment-2420384665 `CSCTriggerPrimitivesProducer` is an `edm::stream` EDProducer, and allocates 30 MB / stream. On an 8-thread/stream Promp…
-
## Description
Hello, I found that evaluate_mil() cannot generate attention heatmaps for 'clam_mb' model while train_mil() with the same parameters can generate heatmaps for 'clam_mb' without a probl…
-
### Description of the new feature / enhancement
show how much megabytes is that update.
### Scenario when this would be used?
Showing megabytes will help metered connection users like me to deci…
-
Thought you might like this
https://youtube.com/shorts/Q3M9Pnh8ROo?feature=share
-
The firmware is 12.1.20 but I only see support for 12.1.119, which isn't working.
The board is Y29GA_MB_V2.1 2020/04/07
The chip is QG2101A
Any help would be appreciated! :-)