-
A RT3/MD380 with installed md380tools has more options for the side buttons that QDMR currently can not decode and thus can not write back to the radio.
For example:
- Direct talkgroup input
- Pr…
-
Based on some discussion on the Pi-Star Facebook group, I started to wonder if MMDVM systems could support DMR Dual Capacity Direct Mode (DCDM). I don't think this is something MMDVM currently support…
-
This problem is pretty easy to reduplicate. First [generate a contact list](http://amateurradio.digital/wizard.php) for TYT MD-380 and then try to update that into the radio:
```
$ dmrconfig -u -t…
-
This firmware currently only provides I2C register control, but it would be convenient if it served as a direct drop-in replacement firmware for devices relying on the factory command set. Close this …
-
When I transmit to ECHO from my OpenRTX (3/11/23 nightly) MD-UV380G to my hotspot I get the following error:
M: 2023-03-12 16:14:43.604 M17, received RF **late entry** voice transmission from K9OJ …
-
DB2OE and ON4MOD reported the following issues affecting OpenRTX when flashed on new Retevis RT3s radios:
1. settings not persistent, except the first time the radio is powered up after a firmware …
-
Hi,
I don't have this radio but I am curious about the ability to read the firmware and also upload unecrypted firmware
Normally bootloaders in Baofeng and TYT radios don't have the ability to r…
-
After writing to my TYT MD-UV390 (non-GPS), the PTT is the only button that is working. I've experimented with the extension section of qDMR, attempting to assign ScanToggle to the various buttons but…
-
Latest firmware on MD-UV380 shows an offset of -3kHz between the frequency set on the VFO and the actual TX/RX frequency. Configuration of AT1846S registers is fine, problem may be due to an issue on …
-
Hello,
I followed the instructions on adding _/etc/udev/rules.d/99-dmr.rules_ and added the recommended values:
> \# TYT MD-UV380
> SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}==…