-
There are some differences in the codeplug and/or memory regions, the codeplug is written to between the GD77/RD-5R and UV380/UV390 variants of OpenGD77. To this end, the variant detection must be imp…
-
Hi
The OpenGD77 firmware now has APRS Tx in all supported radios. This includes Radioddity GD-77, Baofeng DM-1801, Baofeng DM-1801A, Baofeng RD-5R, TYT MD-9600 , Retevis RT-90, TYT MD-UV380, , TY…
-
Using version 0.10.2 on Lubuntu. On prior versions of qdmr I've been able to read from and write to this radio without issue. When using 0.10.2 qdmr did not completely read from the radio. Zones were …
-
I'm using qDMR on a M1 Max MacBook Pro under macOS Ventura to program a Retevis RT3s using firmware 18.16. Everything seems to work well except for the user database.
Trying to install the user …
-
The radio is very similar to other TyT/Retevis radios e.g. TyT MD-UV390. To this end, it is very likely that only the codeplug must be verified. As the binary codeplug can be extracted from the CPS fi…
-
Version 0.10.2
I was having a heck of a time with open source tools clobbering my configs and I think I found at least part of the problem... QDMR (and dmrconf) both kind of choke if you the radio …
-
Debian GNU/Linux host OS (bookworm/sid)
unpack editcp-1.0.31 and copy 99-md380.rules where it needs to go, sudo udevadm trigger
radio is TYT model MD-UV380 136-174MHz/400-480MHz
radio info screen…
-
Tested on: Retevis RT3s
The CTCSS tone is set to D or E+D from the macro menu.
When transmitting with a second radio with the corresponding TX CTCSS tone (71.9 in my case) enabled,
no sound is h…
-
I didn't see this in the capability notes, and I didn't see that there was a way to restore this functionality in the user docs... But is it accurate that OpenRDX right now doesn't work to monitor mul…
-
Linux Mint 20.3 (Una)
Removed apt restriction against installing snap by moving the file out of /etc/preferences.d
Then I could use "sudo apt install snapd" to get snap installed.
Followed by "sudo…