-
Serum has CCForRockers which allows setting a cc number to go to next or previous preset.
Using LoopMIDI and rtmidi, i can send these cc messages via the python bridge to serum
mk3 -> midi message…
-
**Describe the bug**
Sending undefined System Common/Realtime messages (0xF4, 0xF5, 0xF9, 0xFD) to the USB MIDI device which is working with the USB MIDI 1.0 driver (USBAUDIO.sys) corrupts following …
-
**Describe the bug**
ProtoZoA has an echo back program.
Messages that have been sent will be displayed later.
**To Reproduce**
Install the enclosed zoa_loop.uf2 on protoZoA.
[zoa_loop.uf2.zi…
-
According to the MIDI description at http://midi.teragonaudio.com/tech/midispec/run.htm,
> The MIDI spec allows for a MIDI message to be sent without its Status byte (ie, just its data bytes are sent…
-
I am trialling Element to act as the host for a virtual guitar pedalboard. I have built a foot-operated MIDI controller using a Teensy (an Arduino clone). This controller will turn on and off effects …
-
The terminology section (https://webaudio.github.io/web-midi-api/#terminology) currently says the following:
"The terms MIDI, MIDI device, MIDI input port, MIDI output port, MIDI interface, MIDI me…
-
I'm preparing to add midi mesage level interface to symusic, but it's not very clear yet how the interface should be designed.
So I thought I'd ask your opinion here @wrongbad
-
Under "Using /dev/umidi* - Testing", an explaination is needed as to what to do to diagnose if no MIDI messages appear on the terminal, despite positive output of `#doas dmesg | tail` and `$ ls /dev/ …
-
**Describe the solution you'd like**
A clear and concise description of what you want to happen.
I am in the process of building my own control surface and would like to use this crate an an STM…
-
In the current MIDI Fighter Utility version 2.90 (2023-06-08), it is not possible to limit the range the CC values that is associated to an encoder on the MIDI Fighter Twister. Currently, CC values se…