-
I followed the steps here (https://wiki.ubuntu.com/Lenovo) to get my MiPi camera working on my Thinkpad X1Gen10 with Ubuntu 22.04.
These steps work under 6.2:
```
$ sudo apt install linux-modules…
-
The Jetson Nano completely shuts down only while computer vision is running. This issue rarely happens if only USB cameras are on. If the MIPI camera is on, the issue occurs more oftern.
-
I have purchased a Luxonis OAK-FFC 4P and 4 S5K33D recently, and the goal is to view TOFs from 4 cameras at the same time. However, if I run the command $python3 cam_test.py --cameras cama,t camb,t ca…
-
I have purchased a Luxonis OAK-FFC 4P and 4 S5K33D recently, and the goal is to view TOFs from 4 cameras at the same time. However, if I run the command $python3 cam_test.py --cameras cama,t camb,t ca…
-
Hello @dusty-nv,
I am trying to implement webrtc with a jetson orin on a custom board with on-semi MIPI cameras, and it works pretty well most of the time.
The command I use is :
```sh
video-v…
-
**Board**: devkit max78002
**In short**:
I took the provided [CSI2 example](https://github.com/analogdevicesinc/msdk/tree/main/Examples/MAX78002/CSI2), implemented "standby mode", and added the ca…
-
**Is your enhancement proposal related to a problem? Please describe.**
The current ov5640 does not support the parallel interface, it supports MIPI CSI-2 interface.
**Describe the solution you'd …
-
I am trying to get this up and running on a Raspberry Pi Zer 2W. I can enumerate the capture devices, and it find 6. All of the devices, however, report zero characteristics, so I can't open them fo…
-
Hello! I have a fresh Raspbian buster and trouble when I try to run preview or another examples
```
pi@raspberrypi:~/MIPI_Camera/RPI $ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 10 (bust…
-
The camera image being published to ROS by jetbot_camera.cpp is upside-down. When reading the camera image directly with gstreamer with flip_method=0 the image the right way up, so the camera orientat…