-
I'm a bit confused about this repo and how it relates to the MKRWAN repository. Is this an alternatively line of development for newer firwmare versions? Or is it intended for different hardware? Is t…
-
Hello guys,
On the MKR WAN 1310 [product page](https://store.arduino.cc/usa/mkr-wan-1310), it says
> When properly configured, the power consumption is now as low as 104uA!
However I am not abl…
-
Hi,
Is there a way to make this work with **ESP32** and **ESP8266** boards?
Kind regards,
-
There is a design flaw that has come to my attention regarding the modem and SPI flash.
The spi flash is wired to PA12 and PA15 on the SAMD21. The modem is wired to the same pins. The current MKR…
-
The page: https://store.arduino.cc/arduino-nano
The problem is In the Technical specs table, row 11:
"Digital I/O Pins: 22"
that's an error, the number of digital pins in arduino Nano is 12.
My g…
-
I was trying to connect PZEM004 to Arduino nano 33 IoT board, and this library is using SofwareSerial.h,
I tried to dig deeper, and Nano 33 IoT does not use SoftwareSerial anymore, so I'm not sure ho…
-
I'm trying to use Arduino MRK1000 with OV5642 ArduCAM-Mini-5MP-Plus.
In order to do so I first loaded the following example: `ArduCAM_Mini_5MP_OV5642_Plus_Functions`
When I compile I get the same …
-
I'm trying connect my MKRWAN 1310 to The Things Network. I have a device configured for OTAA setup in the TTN and when I run FirstConfiguration and enter the APP EUI and APP Key, I actually see the d…
-
Hardware platform: Sparkfun SAMD21 Mini Breakout + BME280 sensor + VL53L0X sensor
Software platform: Arduino 1.8.3, Arduino SAMD Boards 1.6.20, Sparkfun SAMD21 boards 1.5.3, Windows 10 Pro 1803
Ai…
-
Hi,
I am using a button to put Arduino in sleep mode and wake it up, but the Serial is not working anymore after it is waking up. What should I do?
```
#include "ArduinoLowPower.h"
volatile …