-
Hello,
After upgrading version to 4.6, here is what I get from Chirpstack with an http intégration:
```
{"deduplicationId":"e5aa699","time":"2024-01-06T11:34:06+00:00","deviceInfo":{"tenantId":"…
-
Lora modules seem to be getting more popular in circuit python boards (also the ability to expose esp32 boards that had these in the past is now a thing), and I'm looking to add a couple esp32 boards …
-
Hi in the official documentation https://docs.arduino.cc/static/56e4f5bef7037ff6d3e450cdfd327de1/ABX00017-full-pinout.pdf
pins order is not the same as in this library therefore it can not be p…
-
Hey, I'm trying to set the sender to a low power mode either sleep or standby. The problem I'm having is that when i try to put the device in sleep or standby mode I see no reduction in power consumpt…
-
Hello,
I've been successfully able to flash the last release of the firmware on the Arduino MKR1310 board. The AT commands works perfectly and I can setup the devEUI as expected.
But When tryin…
-
I have two arduino MKRWAN 1300, and want to send & receive by point to point. One board I loaded DumbModemLoRaSender, the other board I loaded LoRaReceiver. But, the receiver can't get anything. Pleas…
-
I tried to setup a development environment with PlatformIO and Raspberry Pi Pico, which uses Arduino-mbed, and the compilation printed a lot of errors starting with something like
```
In file incl…
-
I am using a generic "HW-040" encoder that I got at my local electronics supply. It is connected through a PCF8574N to an Adafruit Trinket M0.
The interruptSwitchEncoder8574 example sketch (with "r…
-
### Is this a bug or a feature request?
bug
### What did you expect?
Data send by device should trigger App Integration (HTTPs Request to my server). An Older version (January/February?) worked.
…
ghost updated
3 years ago
-
Hello everyone,
I bricked my MKRZERO by setting
`#define USB_VERSION 0x200`
to 0x20**1** instead of **0x210**
Anybody knows how to debrick it?
I have an Arduino Uno, MKR1400 and MKR1300: c…