-
Has someone been able to configure the mkr wan 1300 using the MKRWAN library on the us915 band? I'm not able to see any packet going through the gateway (This is configured with the 915E6 band as well…
-
Hi I am using 2 Arduino MKRWAN 1310 boards with 2 GSM Antennas (I guess 2dBi) and the transmission range doesn't exceed 60m using SF12 and 30m using SF7 in an open football court (direct LOS), Althoug…
-
Hello eveyone,
Arduino MKRWAN 1300: ARD-078 1.1.9
MKRWAN: 1.0.10
I see that with set TX power method "power", trying every possible combination of mode and level it actually always returns fals…
-
Hello, I am trying out MAC commands on my MKRWAN 1310. I am currently testing it with a ChirpStack server. The MAC commands are sent with `AT+SENDB=0:xx`.
I started out my test with `AT+SENDB=0:02`…
tohlh updated
4 years ago
-
As far as I can tell, WiFi, BLE and Ethernet only work when activated from the M7 core. Can someone clarify if any of these 3 can be run from the PortentaH7 M4 core, (using RPC if Serial print is need…
-
Hello,
First thanks for the great work to this firmware. It fixes my problem with MKR13x0 Boards and resetting frame counters at board restart. (I run in ABP mode, with TPL5100 timer with battery in …
-
@facchinm I've been experiencing some troubles with the JOIN procedure using the MKRWAN.h library. To confirm I used a sketch that enables me to send AT commands directly to the modem.
On those tests…
-
HAllo,
super genau was ich gesucht habe. Leider nur für das MKR.
wäre super wenn es das auch für andere Boards geben würde.
Habe aktuell ein RFM95 am ProMini dran.
-
After installing all required packages for the board an examples (as well as the MKRWAN library), the sketch "LoRaDumpRegisters" returns false in the LoRa.begin(...).
There seems to be a different …
-
I think I have found an situation where there is ambiguity in waitResponse(). This method is used to parse the AT response from the modem. It defaults to parse for r1=LORA_OK ("+OK") or r2=LORA_ERRO…