-
USB example usb_host_msd_bootloader/test_app/firmware/sam_e54_xpro.X/ shows compile error as bellow:
make[2]: *** No rule to make target '..\\src\\config\\sam_e54_xpro\\ATSAME54P20A.ld', needed b…
-
Hi Team,
I am working on PIC32MK1024GPK1024 MCU and bootloader_apps_usb H3 demo.
When building application and bootloader (Loadable Project ) for **Release** Mode Works fine but got below error in…
-
Sorry if it's not the proper place but I don't know where to ask questions about chipkit importer. Is there a way to make it work together with Harmony?
-
As per [this issue](https://github.com/Microchip-MPLAB-Harmony/contentmanager/issues/2#issuecomment-1041033407) I can run the content manager from the terminal, but when trying to open it via MPLAB X …
-
In https://github.com/Microchip-MPLAB-Harmony/bootloader/blob/df97872c0f83dcef3d3f4671a569fc8f4325d7f5/templates/src/optimized/bootloader_can_arm.c.ftl#L453C30-L453C30 rxBuf of type `${PERIPH_NAME}_RX…
-
Hi. Could you give some guide on how to use this module in deployment?
-
I have an issue with the code generated by Harmony for the bootloader SPI.
I am experiencing data loss in the flash memory after a programming command.
In the "bootloader_spi.c" file, I noticed t…
-
Can Someone please suggest which bootloader host application is comptabile with this code.
Sharing a link of verified bootloader host application with this code will be helpful
-
We use the I2C Driver (I2C1, single Master, single instance of driver using, sending 2 bytes everytime) of Harmony (Core Version 3.10.0) with a clock of 50 kHz on a PIC32MM0256GPM064. The XC32 Compile…
-
I have heard the explanation.
The bootloader has applied UART as a polling method.
So, I heard that the application cannot use the UART to which the interrupt is applied.
By the way, you said tha…