-
Heyhey @syssi,
I´ve got a MPI 15KW WP and currently use the python module https://github.com/jblance/mpp-solar/wiki.
As I got bunch of ESPHome stuff running and only want to ingest stuff into Home…
-
Hi,
I tried with a 24v inverter from easun which however is identical to the 2424MSE1 of MPP solar looking at the esphome log I see that it sends something but receives nothing I also checked the wir…
-
Hallo shining-man,
BT Verbindung mit JK-BMS funktioniert bei mir sehr gut. Vielen Dank dafür.
Jetzt würde ich mir wünschen,das ich auch noch meinen Wechselrichter anschließen kann.
Ich habe einen …
-
I seem to have "lucked out" and gotten a Daly BMS with a sinowealth chip. After struggling to get mpp-solar to work I searched around for another implementation to see if I had a hardware issue or not…
-
https://github.com/NEEY-electronic/JK/blob/JK-Balancer/Jikong-Balancer-RS485-Communication%20Protocol.pdf
https://github.com/jblance/mpp-solar/blob/master/mppsolar/protocols/jk485.py
```
TX -> 55…
syssi updated
2 weeks ago
-
**Support other MPP Inverters than PIP**
**Get other MPP or subbrand inverters running:**
-
if the config looks like this:
```
[JKBMS_UNTEN]
type=jkbms
protocol=jk04
port=C8:47:8C:E5:CC:9F
command=getCellData
outputs=screen
[JKBMS_BOX1_UNTEN]
type=jkbms
protocol=jkv11
port=C8…
-
Hi, I am looking for replicate this project to connect to the voltronic vmIII device. I have an error compiling the firmware... Can I ask for support?
pin32 updated
2 months ago
-
With later firmware versions (>2017) of the infini-/mpp-solar 10+15kw inverters, full bms support was implemented.
Only supported BMS I'm aware of is pylontech via RS485 bus. You need a extra modbus-…
-
**Describe the problem you have/What new integration you would like**
pipsoloar component reads just 1st MPPT for inverters having 2 MPPT
**Please describe your use case for this integration…