-
Avatar is currently ARM-only (with several sub-arch supported). It would be good to expand the framework to support other popular embedded architecture, starting from MSP430.
The recent [Matasano/Str…
lucab updated
10 years ago
-
This issue lists Renovate updates and detected dependencies. Read the [Dependency Dashboard](https://docs.renovatebot.com/key-concepts/dashboard/) docs to learn more.
This repository currently has no…
-
Add support for peek and poke of MSP430 CPU registers. Is this even possible via JTAG? Do we need to inject little assembly routines to support this? Would that be worth doing?
-
code:
dev->regs[dreg] = res_data & mask;
if (!res_data)
dev->regs[MSP430_REG_SR] |= MSP430_SR_Z;
in function step_RxxM in sim.c
if res_data is 0x10000 and mask is 0xffff
the dev->regs[dreg] …
-
Hello,
Debuging does not work, debug console writes about unknown dslite protocol (which is really unknown to mspdebug). Any suggestions?
Regards, Edi
[DebugConsole.txt](https://github.com/plat…
eiten updated
2 months ago
-
Any ideas?
```
# brew install msp430-libc
[...]
==> ../configure --target=msp430 --enable-languages=c,c++ --program-prefix='msp430-' --prefix=/usr/local/Cellar/msp430-gcc/4.7.0 --with-as=/usr/lo…
-
```
Steps to reproduce the problem:
1.Attach MSP430 Launchpad
2.Open Mansos IDE
3.Motelist failed to find any devices
What is the expected output? What do you see instead?
Version (SVN revision) of…
-
```
What steps will reproduce the problem?
1. Connect PC with MSP430F5438 with USB.
2. Send 102 Bytes data to the MCU per 300 ms
3. transfer the data using Bluetooth every time after finishing receiv…
-
The TelosB node and Tmote Sky node should be identical (hardware wise). However, using `xtimer_sleep(2)` is not sleeping two seconds, but more like 7 seconds. Will investigate.
-
The Embedded Controller provides status information about the battery.
This issue collects information and code drops related to implementing a driver that can ultimately report charge level and char…
Artox updated
2 years ago