-
Hi,
Firtst of all thanks for providing an entry point to grab the vbus data of my solar system.
I tried to get it running on Home Assistant 2021.12.7, but it looks like the yaml syntax is outdate…
-
I am migrating from MyController to Openhab 2.4. I have a weather station node that has wind speed, wind direction (angle), rain amount, light level.
I do not believe the MySensors binding curre…
-
Set this up for communication with some Arduinos (and maybe some RPi zero with no wifi) for plant moisture sensors and door/window sensors.
Communication by MQTT.
See:
https://home-assistant.io…
-
When using the [MySensors library](https://platformio.org/lib/show/548/MySensors), linking fails with...
```
.pio/build/genericSTM32F103CB/src/main.cpp.o: In function `premain()':
main.cpp:(.text…
-
Hey folks,
it would be nice to log if some command send to the nodes are failed.
Maybe its possible to set a repeat if this happened.
regards,
n3ro
http://forum.pimatic.org/topic/1336/mysensors-gw-…
-
Please add support for all sensors, types and methods in:
[(https://github.com/mysensors/MySensors/blob/development/core/MyMessage.h)]
2.0.0 have just been released 😀
Thanks for your efforts!
-
Hi all
I'm trying to read an MQ131 but i have an error (missing library)
Where do i get this library
#include
I only found in MySensors library a file named "MySensors.h" with an s at the e…
-
## Expected Behavior
Serial port gateway should not reconnect to serial port so frequently. It is bad for performance and - every reconnect to serial port - resets the connected ArduinoUno Gateway De…
-
I use a NRF52832 module with P0.01 as SDA and P0.05 as SCL. After I've installed https://github.com/mysensors/ArduinoBoards I got an error: The current selected board needs the core 'sandeepmistry:nRF…
-
First of all thanks for the great work for the MySensors OpenHAB binding.
I use binding version 2.3.0 with OpenHAB2.
When I start a MySensors device it sends the sketchinfo end presents the child.…