-
MySensors 2.3.0
NodeManager 1.7
Homeassistant 0.73.2 controller
Default SensorDimmer does not respond to changing brightness. onReceive function seems to only respond to V_STATUS messages.
…
-
New device type for geiger counters. Is S_GEIGER_COUNTER better?
The device sends in radiation level (uSv/hr) as V_LEVEL
usv = cpm \* x;
x = tube constant
Is it still useful to send cmp value to …
-
I have the same problem as described here: https://github.com/home-assistant/core/issues/59388
When sending multiple messages at the same time from HA to MySensors nodes I frequently experience som…
-
It seems that currently there seems to be no way to report sensor and actuator errors to controllers, this could be remedied by creating an internal data type for reporting sensor errors (one of the v…
-
It's currently not possible to tell the difference between different gateways. This is useful if one wants to support multiple gateways on a single controller. This is also useful if the gateway is us…
-
While creating a MySensors add-on for the Mozilla WebThings Gateway I gained a lot of understanding of what MySensors can do. But I also got a better understanding of what could still be improved.
…
-
**Describe the bug**
The selection of serial port is not available
**To Reproduce**
Steps to reproduce the behavior:
1. Go to instance
2. Click on serial port
3. Scroll down to 'serial por…
-
At this moment I do not see any option to do a factory reset(erase EEPROM completely) via default library.
It may be a good idea to implement `I_FACTORY_RESET` to perform complete EEPROM erase. Thi…
-
Regarding my latest post on this topic (https://forum.mysensors.org/topic/4654/request-variable-from-gateway) I want to propose a slightly change on how mysensor handles requests.
I am sadly not too …
-
I plan to install ceiling lights which can be turned on or off through a push button. This button is only enabled while it is pressed, so the light toggles everytime the switch is pressed. I would lik…